Wire Sawing Cheltenham – This project required us to cut this parapet into manageable sections for removal using an excavator. We had to cut a chase in the back of the parapet using our Hilti DCH150-SL as we found a chamfer when they dug out the back. This wasn’t supposed to be there but as we all […]
Wire Sawing – Cheltenham Read More »
Drilling 107mm and 52mm through heavily reinforced 600mm concrete slab. This is to allow for drainage.
Sherborne Castle – Core Drilling Read More »
This is an update to show the after effects of using the Hilti WS15 Wire saw to cut this block into manageable sections for the client to remove using an excavator. These photo’s show the cuts required to reduce the weight down to below the ‘Safe Working Load’ of the excavator. This saved the client
Wire Sawing Old Concrete Staircase for Removal- The client was previously breaking stairs with small machines and was struggling due to hardness of the concrete. Therefore we are using the Wire Saw to plunge the wire down the back and then pull the wire through the bottom using the Hilti WS15.
Wire Sawing Old Concrete Staircase for Removal Read More »
This is our apprentice Liam perfecting his skill with the Hilti TS20 Track saw. These are photos of cutting upstand into 2m sections for removal.
Track Sawing Concrete Stand in Cheltenham Read More »
Will is taking his assessment next week to become a fully qualified NVQ level 2 Drilling and sawing operative. This will be carried out in Nottingham at the The Drilling and Sawing Association (DSA) head quarters for two days…good luck Will!
Best of Luck to One of Our Operatives! Read More »
This contract consisted of 100m of track saw cutting of a retaining wall. The wall was 300mm thick and was heavily reinforced using our Hilti TS20 and a 45KVA Generator supplied by CES Electrical Poole. We had to provide a 1000ltr water container and pump to feed the saw as we used near on 2000ltrs
Cheltenham – Track Saw Cut Retaining Wall Read More »
This Job consisted of cutting a doorway into manageable pieces for removal by hand in the building fabric. This was completed on time and within budget using the Hilti DST 10 CA Track Saw for a client in Poole on a set of large residential flats overlooking Poole and Bournemouth. We cut the opening into
Harbour View- Cutting Doorway Through Building Fabric Read More »